Expert of Systematic Overall Solution for Calcium Material Resource Utilization

+
  • 双轴加湿搅拌机 (8).jpg
  • 双轴加湿搅拌机 (20)(1738917493990).jpg
  • 双轴加湿搅拌机 (11).jpg
  • 双轴加湿搅拌机 (2).jpg
  • 双轴加湿搅拌机 (5).jpg
  • SJ型双轴粉尘加湿搅拌机.jpg
  • 双轴加湿搅拌机 (1).jpg

SJ type dual-axis dust humidifying mixer

Product Introduction: The SJ type double-shaft mixer is an efficient device for spraying and mixing powdered materials. By controlling the amount of water added, it achieves the appropriate humidity requirements.

Applications Mainly used under dust collectors in thermal power plants, it can also be used in industries such as chemical metallurgy, mining, and building materials.

Whatsapp:

Product Introduction

The double-shaft mixer is equipped with a humidifying spray system to ensure uniform spraying and adjust the water supply to meet needs. It uses a hand-operated oil pump to centrally supply lubricating grease to four drive bearings, facilitating the maintenance and use of the equipment, with the advantages of efficiency and time-saving. The length of the mixing spiral can be designed according to user requirements to meet the different needs of different users.

Outstanding Advantages

  1. Using two sets of spiral blades for stirring, it has high stirring efficiency and occupies a small area.
  2. The spiral blades are made of high wear-resistant special alloys or composite ceramics, featuring a long service life.
  3. The double-shaft mixer uses a cycloidal pinwheel reducer for transmission, ensuring smooth rotation and low noise.
  4. The double-shaft mixer feeds from the top and discharges from the bottom, with a reasonable structure and tight seals between each joint, ensuring smooth operation.

Working Principle and Structure

The core working principle of the twin-shaft mixer is to drive the mixing blades to efficiently mix and transport materials through the synchronous rotation of two helical shafts. During the mixing process, the equipment can be equipped with a spray humidification device to provide appropriate humidification treatment to the materials according to process requirements. This design ensures that the twin-shaft mixer can achieve uniform humidification of powdery and small granular materials without producing dry dust or leaking water droplets, thus meeting the requirements for subsequent loading and transportation or transfer to other conveying equipment.

Production site

Double-axis humidifying mixer
Double-axis humidifying mixer
Double-axis humidifying mixer
Double-axis humidifying mixer
Double-axis humidifying mixer

Technical Parameters

Project/Model SJ-10 SJ-20 SJ-40 SJ-60 SJ-80 SJ-100 SJ-200
Processing Capacity T/h 10 20 40 60 80 100 200
Burning Diameter mm 0400 0400 0600 0600 0700 0700 0800
Spindle Speed r.p.m 34 34 34 34 34 34 34
Reducer Model XWD4-5-1/43 XWD5.5-6-1/43 XWD11-8-1/43 XWD15-9-1/29 XWD18.5-9-1/29 XWD22-10-1/29 XWD30-11-1/29
Motor Power KW 4.0 5.5 11 15 18.5 22 30
Sprayer Water Pressure MPa 0.4~0.8
Moisture Content % 15-20

Note: 1. For the same equipment, the output may vary due to factors such as material moisture, feed particle size, and discharge particle size.

2. If there are special requirements for processing capacity, our company can customize it.

Free access to more product information

If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!

Submit Message

Related Cases